Loading... Please wait...

Die Compatibility

 

Machine Compatibility Guide for Wafer Thin/ Etched Dies

Machine

 

How to Cut

(build sandwiches starting from bottom-up)

How to Emboss

 

Spellbinders® Platinum™ & Platinum 6™ Die Cutting & Embossing Machines

  1. Platform

  2. Clear Cutting Plate

  3. Paper, cardstock, craft foil, etc.
  4. Shaped die template with cut ridges down.
  5. Clear Cutting Plate

  6. Run through the machine

Embossing a Cut Shape

  1. Platform
  2. Shaped die template (cut ridges up) with cut shape inside
  3. Tan Embossing Mat
  4. Embossing Plate
  5. Run through the PlatinumTM machine
Embossing Sandwich for Em-bossing Fold’ersTM 
  1. Platform
  2. Em-bossing Fold’er™ with paper inside
  3. Clear cutting plate (for single or double-sided Em-bossing Fold’ers™) or 3D Embossing Plate (for 3D Em-bossing Fold’ers™)
  4. Run through the machine

 Spellbinders® Sapphire™ & Prizm™ Die Cutting & Embossing Machine

  1. A-Base Plate (white)
  2. Shaped die template with cut ridges up.
  3. Paper, cardstock, craft foil, etc.
  4. C-Cutting Plate (grey)
  5. Run through the machine
  1. A-Base Plate (white)
  2. Shaped die template (cut ridges up) with cut shape inside
  3. Tan Embossing Mat
  4. B-Embossing Plate (blue)
  5. Run through the machine

Spellbinders® Grand Calibur™ Machine

  1. A-Base Plate (grey)
  2. Spellbinders Die with cut ridges up
  3. Paper, cardstock, craft foil, etc.
  4. C-Cutting Plate (white) Feed through the Spellbinders Grand Calibur Machine
  1. A-Base Plate (grey)
  2. Spellbinders Die with cut ridges up, die cut inside die
  3. Spellbinders Tan Embossing Mat
  4. B-Embossing Plate (pink) Feed through the Spellbinders Grand Calibur Machine

Spellbinders® Wizard™ Machine (discontinued)

  1. White Mat
  2. Spacer Plate (W-017 White for Purple machines, W-024 Magnetic for Raspberry machines)
  3. Spellbinders Die with cut ridges up
  4. Paper, cardstock, craft foil, etc.
  5. White Mat Feed through the Spellbinders Wizard Machine
  1. White Mat
  2. Spellbinders die with cut ridges up, die cut inside die
  3. Spellbinders Tan Embossing Mat
  4. White Mat Feed through the Spellbinders Wizard Machine

Cuttlebug™ by Provo Craft®

  1. 1. A Plate
  2. C Plate
  3. Spellbinders Die with cut ridges up
  4. Paper, cardstock, craft foil, etc.
  5. B Plate Feed through machine.
  1. A Plate
  2. Spellbinders Die with cut ridges up, die cut inside die
  3. One Spellbinders Tan Embossing Mat
  4. Two or three pieces of cardstock (too much cardstock could result in B plate breakage)
  5. Two B Plates Feed through machine

Epic 6 by Lifestyle Crafts

  1. Grey cutting platform
  2. Spellbinders™ Die with cut ridges up
  3. Paper, cardstock, craft foil, etc.
  4. Clear cutting mat Feed through machine
  1. Grey cutting platform
  2. Spellbinders Die with cut ridges up, die cut inside die
  3. Spellbinders Tan Embossing Pad
  4. Cardstock shim – one piece
  5. Clear cutting mat Feed through machine

Big Shot™ BIGkick™ Vagabond by Sizzix® with Universal platform

  1. Platform with tabs closed.
  2. Spellbinders Die with cut ridges up
  3. Paper, cardstock, craft foil, etc
  4. Two acrylic mats Feed though machine.
  1. Platform with tabs closed
  2. Spellbinders Die with cut ridges facing up, die cut inside die
  3. Two Spellbinders Tan Embossing Pads
  4. Tri Fold piece of 12 x 6" cardstock, place on top of embossing mats
  5. One acrylic mat Feed through machine.

Big Shot BIGkick Vagabond by Sizzix with Solo Platform

  1. Sizzix Solo Platform with Shim
  2. Sizzix Solo Thin Die Adapter
  3. Sizzix Clear Cutting Pad
  4. Spellbinders Die with cut ridges up
  5. Paper, cardstock, craft foil, etc.
  6. Sizzix Clear Cutting Pad Feed though machine.
  1. Sizzix Solo Platform with Shim
  2. Sizzix Impressions Pad
  3. Spellbinders Die with cut ridges up, die cut inside die
  4. Sizzix Silicone Rubber Pad
  5. Sizzix Clear Cutting Pad Feed though machine.

Sizzix Machine by Ellison®

  1. Attach Sizzix System Converter
  2. On the cutting pad, place material to cut, then Spellbinders Die with cut ridges down
  3. Place the Spellbinders W-017 White Spacer Plate over the Spellbinders Die
  4. Trifold a 12 x 6” piece of cardstock and use as a shim
  5. Place shim on top of Spellbinders White Spacer Plate Feed into machine and pull the handle down
  1. Attach Sizzix System Converter
  2. On the cutting pad, place Spellbinders Die with cut ridges up, die cut inside of die
  3. Place Spellbinders Tan Embossing Mat on top of Spellbinders Die
  4. Place paper shim on top of Tan Embossing Mat Feed into machine and pull the handle down

Big Shot Pro by Sizzix®

  1. Sizzix Solo Platform
  2. Sizzix Solo Shim
  3. Sizzix Solo Wafer Thin Die Adapter
  4. Cutting Pad Big Shot Pro Standard 5. Spellbinders™ Die with cut ridges up
  5. Paper, cardstock, craft foil, etc
  6. Cutting Pad Big Shot Pro Standard Feed through machine
  1. Sizzix Solo Platform
  2. Sizzix Solo Shim
  3. Sizzix Impressions Pad
  4. Spellbinders Die with cut ridges up, die cut inside of die
  5. Sizzix Silicone Rubber
  6. Cutting Pad Big Shot Pro Standard Feed through machine

Double Do® XL by AVEC available in Europe Only

  1. Grey Mat
  2. Spellbinders Die with cut ridges up
  3. Paper, cardstock, craft foil, etc.
  4. Blue Mat Feed through machine
  1. Blue Mat
  2. Spellbinders Die with cut ridges up, die cut inside of die
  3. Spellbinders Tan Embossing Mat
  4. Blue Mat Feed through machine

 

Machine Compatibility for Steel Rule Dies

Machine

How to Cut

(build sandwiches starting from bottom-up )

Spellbinders® Platinum™ &

Platinum 6™  Die Cutting & Embossing Machine

  1. Clear Cutting Plate
  2. Steel Rule Die with die facing up.
  3. Paper, cardstock, craft foil, etc.
  4. Clear Cutting Plate
  5. Run through the Platinum machine

Sizzix BIGkick

 
  1. Clear cutting pad             
  2. Contour™ die face up     
  3. Cardstock, etc   
  4. Clear cutting pad

Sizzix Big Shot/Express/Plus

  1. Clear cutting pad             
  2. Contour™ die face up     
  3. Cardstock, etc   
  4. Clear cutting pad

Sizzix fabi

  1. Clear cutting pad             
  2. Contour™ die face up     
  3. Cardstock, etc   
  4. Clear cutting pad

Sizzix Vagabond

 
  1. Clear cutting pad             
  2. Contour™ die face up     
  3. Cardstock, etc   
  4. Clear cutting pad

Sizzix Big Shot Pro

  1. Adapter Pad (Sizzix)         
  2. Clear cutting pad             
  3. Contour™ die face up     
  4. Cardstock, etc   
  5. Clear cutting pad

Cuttlebug 

  1. Plate B (Cuttlebug)          
  2. Cardstock, etc.  
  3. Contour™ die face
  4. Plate B (Cuttlebug)